EyeControl device unable to connect to WIFI network

• Related Articles

• Device fail to connect to wifi connection

    If after performing all actions to configure WiFi a message is heard  “Failed to connect”, please restart the device and repeat the following steps: Press and hold the (+) and (-) buttons together for 3 seconds. A confirmation will be heard, ...

• While trying to connect to WiFi, device ask to refresh browser

  In case you accidentally entered a wrong password in the EyeControl page, the device will ask you to refresh your browser and try to connect again. Before refreshing your browser, make sure you are still connected to the EyeControl-AP-XX:XX:XX ...

• EyeControl - AP address cannot be found in the wifi list

  The WiFi list is the list of all available networks in your area. If the EyeControl device cannot be found, please refresh the list. If it still cannot be found try to configure WiFi from a different PC or smartphone. Tip: Wait until the device ...

• WiFi turned off after configuration

  After WiFi is configured (WiFi led is green) you will need to power off the device by pressing and holding the power button, in order to save the configuration. If the press on the power button was too short, the WiFi will be turned off. Be sure to ...

• Customize Grid3 settings for EyeControl

  Attached instructions of how to customize Grid3 settings in order to use it with EyeControl device