While trying to connect to WiFi, device ask to refresh browser
In case you accidentally entered a wrong password in the EyeControl page, the device will ask you to refresh your browser and try to connect again. Before refreshing your browser, make sure you are still connected to the EyeControl-AP-XX:XX:XX network.
Related Articles
Device fail to connect to wifi connection
If after performing all actions to configure WiFi a message is heard “Failed to connect”, please restart the device and repeat the following steps: Press and hold the (+) and (-) buttons together for 3 seconds. A confirmation will be heard, ...
EyeControl device unable to connect to WIFI network
Follow the steps in section 7.5 Connectivity Mode in the User Manual, to connect your EyeControl device to WIFI . In case the EyeControl device unable to connect to your home or hot-spot network, please make sure the network`s name does not include ...
EyeControl - AP address cannot be found in the wifi list
The WiFi list is the list of all available networks in your area. If the EyeControl device cannot be found, please refresh the list. If it still cannot be found try to configure WiFi from a different PC or smartphone. Tip: Wait until the device ...
An error message appears when trying to connect to apps website
To connect your EyeControl device to the apps website, make sure first that the same device is not already paired by Bluetooth to your computer or PC. Go to your computer`s Bluetooth settings and press remove device if an EyeControl device is paired ...
WiFi turned off after configuration
After WiFi is configured (WiFi led is green) you will need to power off the device by pressing and holding the power button, in order to save the configuration. If the press on the power button was too short, the WiFi will be turned off. Be sure to ...